Get solutions for tech gadgets and smart home appliances.

When your Windows 10 Wi-Fi is not working, there is a variety of software and hardware problems that can cause your Wi-Fi to stop running. Everybody needs Internet access nowadays, for end-users, Wi-Fi is the invisible network resource that they connect to. It is one of the most frustrating issues you can encounter and worst yet, not seeing your Wi-Fi network at all when you need to send an important email. Wireless networking is both pervasive and getting more complicated behind the scenes, so can there be anything more frustrating than having a dropped Wi-Fi connection? How to fix network connection issues windows 10 Wi-Fi?

You might not be able to see your Wi-Fi network for several reasons—ranging from being in a location with limited or no internet connection, being in airplane mode, by simply forgetting to turn Wi-Fi on, or it could be a router issue, but more on that later. As you know that so much of modern computing relies on a web connection, being cut off from the internet can bring your productivity to a screeching halt. 

While the reasons can vary, use the steps and tools in this document to resolve wireless Internet connection issues. When wireless connection problems occur, you can troubleshoot the most common Wi-Fi issues yourself in Windows 10.

Connect to a Wi-Fi Network- 

Firstly, select a network from the Wi-Fi list. Now, you can go to the Network icon that’s located on the lower right side of the Windows taskbar, to see the list of available Wi-Fi networks. After that, the network’s availability is shown with either a signal icon, which indicates it’s secured with a password or a signal icon with an exclamation mark (!) in the upper left corner that displays it as open and not secured, also the bars on the Wi-Fi icon indicate signal strength. The higher the signal strength, the stabler the Wi-Fi network performance.

Fast Way to fix network connection issues windows 10 Wi-Fi:

Wi-Fi is connected but you don’t have internet: 

Run a troubleshooter: To fix network connection issues windows 10 Wi-Fi, sometimes, Windows will claim you’re connected to the internet, and the connection is stable. Although, you won’t be able to access the web, and the problem is caused by either a faulty TCP/IP stack, IP address, or DNS client resolver cache. 

  • Firstly, try operating Windows’s native Network Troubleshooting tool. You’ll discover it in Settings > Update and security > Troubleshoot > internet connections.

If that doesn’t run, start Command Prompt and type the following commands. Then, Enter after every command:

  • netsh winsock reset
  • ipconfig /release
  • netsh int ip reset
  • ipconfig /renew
  • ipconfig /flushdns

Uninstall the Network’s Adapters: If you see a message that reads Windows 10 can’t connect to this network, the best solution is to uninstall the network adapter’s driver and allow Windows to reinstall it automatically.

Follow the steps below to complete the process:

  1. Hold Windows key + X and click on Device Manager.
  2. Right-click on the network adapter and select Uninstall.
  3. If prompted, tap on Delete the driver software for this device.
  4. Then, restart your machine and Windows will automatically reinstall the driver.

Also, download & install the latest wireless LAN adapter driver can resolve common issues with the wireless Internet connection.

  1. In Windows, search for and access Device Manager.
  2. After that, In the Device Manager window, double-click Network adapters, and right-click the name of the wireless adapter and then select Update driver.
  3. If the tool detects an updated driver is located, follow any on-screen instructions to install it.
  4. Attempt to connect to the Internet.

Check the IP address: 

If the issue persists and your Wi-Fi is still not working on Windows 10, there are further steps you can practice.

Change the Network name and password:

The specific instructions vary between routers, you need to connect to your router using an ethernet cable, enter your router’s IP address in your browser, log into the device’s portal, and locate the correct fields.

Set the Wi-Fi network’s Channel-Bidth: 

Routers can broadcast their networks on different channels, and If too many routers in close proximity use the same channel, the airwaves can become cluttered.

  • Log into your router’s portal and discover the channel setting, and try to set it Auto.
  •  If there’s no Auto setting, try a few various channels and view if your problem goes away.

Wi-Fi networks not Found:  

Lastly, you can try changing the region of your Wi-Fi adapter, and execute it smoothly, just use the guide below:

  1. Firstly, press Windows key + R.
  2. Then type, devmgmt.msc, and press Enter.
  3. Now, expand the Network Adapters section.
  4. After that, right-click on the name of your network adapter.
  5. Open Properties.
  6. Select, the Advanced tab.
  7. Then, highlight Country and Region.
  8. After that, choose the entry according to your location.

Forget the Wi-Fi Network: 

Sometimes, you need your machine to forget a Wi-Fi network on Windows 10 is easy:

  1. Start the Start Menu and click on Settings.
  2. Tap on Network and Internet.
  3. Select Wi-Fi from the menu on the left-hand side of the screen.
  4. Select Manage known networks.
  5. After that, highlight the name of the network you want to forget.
  6. And, select forget.